Jvc GR-D775U Manuel d'utilisateur télécharger pdf (Page 43)

EN 43

EDITING

MasterPage: Start_Right

ADVANCED FEATURES

It is also possible to copy recorded scenes

from the camcorder onto another video unit

equipped with a DV connector. Since a digital

signal is sent, there is little, if any, image or

sound deterioration.

To use this camcorder as a player

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit

equipped with a DV input connector using a DV

cable as shown in the illustration.

3 Start playback on the camcorder.

( pg. 21)

4 At the point you want to start dubbing, start

recording on the video unit. (Refer to the video

unit’s instruction manual.)

5 To stop dubbing, stop recording on the

video unit, then stop playback on this

camcorder.

NOTES:

● It is recommended to use the AC Adapter as

the power supply instead of the battery

pack. (

 pg. 13)

● If a blank portion or disturbed image is played

back on the player during dubbing, the dubbing

may stop so that an unusual image is not

dubbed.

● Even though the DV cable is connected

correctly, sometimes the image may not appear

in step 4. If this occurs, turn off the power and

make connections again.

● If “Playback Zoom” ( pg. 25) or “Playback

Special Effects” (

 pg. 25) is attempted or

SNAPSHOT is pressed during playback, only

the original playback image recorded on the

tape is output from the DV IN/OUT connector.

● When using a DV cable, be sure to use the

optional JVC VC-VDV204U or VC-VDV206U

DV cable.

To use this camcorder as a recorder

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit

equipped with a DV output connector using a

DV cable as shown in the illustration.

3 Set the camcorder’s Power Switch to

“PLAY”.

4 Set “REC MODE” to “SP” or “LP”.

( pg. 35)

5 Start playback on the player.

6 Press the Recording Start/Stop Button to

engage the Record-Pause mode.

• The “” indication appears on the

screen.

7 At the point you want to start dubbing,

press the Recording Start/Stop Button to start

dubbing. The indication rotates.

8 Press the Recording Start/Stop Button

again to stop dubbing. The indication

stops rotating.

9 Press 7 to return to the normal playback

mode.

NOTE:

Digital Dubbing is performed in the sound mode

recorded on the original tape, regardless of the

current “SOUND MODE” setting. (

 pg. 33)

Appears if dubbing of copyguarded signals is

attempted while this camcorder is being

used as a recorder.

Dubbing To Or From A Video Unit

Equipped With A DV Connector

(Digital Dubbing)

Core ﬁlter

To DV IN/OUT

DV cable (optional)

To DV IN/OUT

Video unit equipped with DV connector

COPY PROTECTED

DV IN

GR-D775US_EN.book Page 43 Friday, December 15, 2006 11:14 AM

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Commentaires sur ces manuels

Pas de commentaire