JVC Camcorder GY-HM70U Manuel d'utilisateur télécharger pdf (Page 22)

Troubleshooting

If you encounter problems with this unit, check the following before requesting service.

1 Refer to “Trouble” below.

2 Refer to the “Troubleshooting” section in the “Detailed User Guide”.

If you have difficulties operating the unit, refer to the detailed descriptions in the

“Detailed User Guide”.

3 This unit is a microcomputer-controlled device. Electrostatic discharge, external

noise and interference (from a TV, a radio, etc.) might prevent it from functioning

properly.

In such a case, reset the unit.

Turn off the power.

Remove

the AC adapter

and battery pack from this unit, reattach them, turn

on the power.

4 If the above do not solve the problem, consult your nearest JVC dealer or JVC

service center.

Trouble

Trouble Action Page

Power supply

POWER/CHARGE

lamp starts blinking

when the power is

turned off.

The battery pack is being charged. 8

Recording

Recording cannot be

performed.

Check the A/B button. 13

Set to the recording

mode by tapping

the “<<CAM” button.

Recording stops

automatically.

Turn off this unit,

wait for a while, and

turn it on again. (This unit stops

automatically to protect the circuit

when the temperature rises.)

Recording stops automatically after

12 hours of continuous recording.

Unable to record

properly in the

Intelligent Auto mode.

When there are multiple

light sources

and depending on the shooting

conditions, exposure and focus may

not be adjusted correctly in the

Intelligent Auto mode. In this case,

adjust the settings manually.

Playback

Sound or video is

interrupted.

Sometimes playback is interrupted

the connecting section between two

scenes. This is not a malfunction.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

JVC Camcorder GY-HM70U Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Dashcam JVC Camcorder GY-HM70U