JVC XV-NA77SL Manuel d'utilisateur télécharger pdf (Page 49)

Additional information

XV-NA77SL/GNT0036-002B/English

Additional

information

Troubleshooting

Power

Power does not come on.

\ Power plug is not inserted securely. Plug in securely.

Operation

“REGION CODE ERROR!” is shown on the TV screen.

\ Region code of the inserted disc does not match the unit.

Check the region code of the disc printed on the disc jacket.

Operation is not possible.

\ Microcomputer malfunction due to lightning or static electricity.

Turn off the power and unplug the power cord, then connect

the power cord again.

\ Moisture condensation caused by a sudden change of

temperature or humidity. Turn off the power, then turn it on a

few hours later.

\ The disc does not allow the operation, or an unplayable disc is

inserted. Check and replace the disc (see page 2).

\ This unit does not support the playback by play list of VR

format discs.

[LOCK] is displayed on the display window and the disc tray

does not open.

\ When you press 0 while pressing down 7 on the unit in

standby mode, the tray lock function is activated. The disc tray

cannot be opened or closed in this status. To release this

status, press 0 while pressing down 7 on the unit in standby

mode.

TV cannot be operated with the remote control unit.

\ Set the manufacturer code correctly according to your TV (see

page 11).

\ Set the TV - DVD switch on the remote control unit to “TV.”

Setting cannot be changed in the [LANGUAGE] preference

display.

\ Stop playback and change the setting in the [LANGUAGE]

preference display.

The audio language and subtitle cannot be changed.

\ Only one language is recorded on the disc currently being

played back.

\ The disc being played back does not accept the AUDIO - fs/

Rate button and SUBTITLE button operation. Change the

subtitle using [SUBTITLE] in the [LANGUAGE] preference

display (see page 38).

No subtitle is diplayed.

\ No subtitle is recorded on the disc currently being played

back.

\ [OFF] is selected in [SUBTITLE] in the [LANGUAGE]

preference display. Select the desired language in

[SUBTITLE] (see page 38).

\ Subtitle may not be displayed correctly during A-B repeat

playbacik.

Picture

Picture is noisy.

\ The unit is connected to a VCR directly and the copyguard

function is activated. Connect the unit so that the picture

signal flows directly to the TV.

\ With some discs, the picture may be blurred when [PICTURE

SOURCE] is set to [FILM] or [AUTO]. Set [PICTURE

SOURCE] to [VIDEO (NORMAL)] or [VIDEO (ACTIVE)].

Picture is distorted or no picture is displayed.

\ The PAL/NTSC setting does not match the color system of

your TV.

No picture is displayed on the TV screen or the screen is

blurred or divided into two parts.

\ The unit is in the Progressive scanning mode though it is

connected to a TV via the VIDEO or S-VIDEO jack, or via the

SCART connector. Set the PAL - NTSC - REMOTE selector

on the rear panel to “REMOTE” and make the Progressive

scanning mode inactive by using the VFP - PROGRESSIVE

SCAN button (when playing back DVD VIDEO discs recorded

with PAL or NTSC system). Alternatively, set the PAL - NTSC -

REMOTE selector to “NTSC” and make the Progressive

scanning mode inactive by using the VFP - PROGRESSIVE

SCAN button (when playing back DVD VIDEO discs recorded

with NTSC system). (See page 6.)

Audio

DVD VIDEO disc playback sound level is lower than TV

broadcast sound level.

\ Set the [D.RANGE CONTROL] preference to [TV MODE] (see

page 39).

Analog audio output is distorted.

\ Set the [OUTPUT LEVEL] preference to [LOW] (see page 39).

[MULTI CH] is shown in the display window when playing

back a DVD AUDIO disc.

\ The track is prohibited from down-mixing to 2-channel stereo

audio. Listen in multichannel surround audio (see page 39).

MP3/WMA

No sound comes out.

\ MP3/WMA disc is recorded with the “packet writing (UDF

format).” It cannot be played.

Files (tracks) are not played in the recorded order.

\ This unit plays the files in the alphabetic order. So, the

playback order can vary.

WMA files cannot be played back.

\ The file is copy protected.

\ The file is recorded with a bit rate under 48 kbps. The unit

does not support such WMA files.

JPEG

No picture is played back, or the screen turns black.

\ Format of the files is not the baseline JPEG. The unit supports

only the baseline JPEG format.

The preference display cannot be turned on.

\ You cannot turn on the preference display when a JPEG disc

is inserted.

XV-XV-NA77SL[B].book Page 47 Thursday, July 31, 2003 8:04 PM

1 2 ... 44 45 46 47 48 49 50 51 52 53 54

Commentaires sur ces manuels

Pas de commentaire

JVC XV-NA77SL Manuel d'utilisateur Page 49

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD JVC XV-NA77SL