JVC DT-R24L4DU Spécifications télécharger pdf (Page 8)

1 POWER switch

Turns AC power on or off.

You need to press button (☞ t on page 10) to use the monitor after turning on the POWER switch.

2 AC IN terminal

AC power input connector.

Connect the provided AC power cord to an AC outlet.

Attach the provided power cord holder to prevent accidental disconnection of the AC power cord (☞ “Attaching the power cord holder” on

page 9).

CAUTION

Do not connect the power cord until all other connections are completed.

3 REMOTE terminal

Terminal for controlling the monitor by an external control (☞ “External Control” on page 18).

4 For DT-R24L4D: VIDEO (INPUT 1/INPUT 2) terminals (BNC) / For DT-R17L4D: VIDEO terminals (BNC)

Input (IN) and output (OUT) terminals for the composite signals.

5 For DT-R24L4D: AUDIO ASSIGN (IN 1/IN 2) terminals (pin jack) / For DT-R17L4D: AUDIO (IN) terminals (pin jack)

Input terminals for the analog audio signals.

Use this terminal for the analog audio connection of the SDI. When a superimposed signal (EMBEDDED AUDIO signal on an SDI signal) is

input, analog audio signals cannot be input.

For DT-R24L4D: Select the video input to assign the audio signal in “AUDIO1 ASSIGN.” or “AUDIO2 ASSIGN.” (☞ “AUDIO SETTING” on

page 14).

•

Rear panel

Connections

The illustration of the monitor

is of DT-R24L4D.

Security slot

Attach a security wire to this slot.

DT-R24L4D

DT-R17L4D

DT-R17L4DDT-R24L4D

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Pas de commentaire

JVC DT-R24L4DU Spécifications Page 8