Jvc CA-MD9R Manuel d'utilisateur télécharger pdf (Page 59)

English

If you are recording an AM (MW/LW) broadcast and you hear

interference, move the BEAT CUT switch on the back panel from

position 1 (the normal mode) to position 2.

BEAT

CUT

Standard Recording

You can record any sound source on the tape.

❏ You can also record the same source on the MD at the same time. (See page 34.)

Using the unit only

1. Insert a blank or erasable tape into cassette holder.

2. Press the button if you want to record on both sides of the tape.

The indicator above the button lights up.

❏ When using the auto reverse mode, press the ‹ button then the 7 button to start recording

in the forward (‹) direction.

3. Prepare the source, for example, by tuning in a radio station, loading CDs or MDs, or turning on

the external component.

4. Press the REC PAUSE button.

The indicator above the button lights up and the CA-MD9R enters recording pause mode.

5. Press the ‹ (or ¤) button to record the front side (or the reverse side).

❏ When using the auto reverse mode to record both sides of a tape, press the ‹ button to

begin the recording from the front side.

To pause, press the REC PAUSE button. Then press either the ¤ or ‹ button to restart recording.

To stop recording, press the 7 button.

To remove the tape, press down the 0 button after stopping the play.

REC PAUSE

EN.51-72.CA-MD9R[E]/F 6/16/98, 1:52 PM55

1 2 ... 54 55 56 57 58 59 60 61 62 63

Pas de commentaire

Jvc CA-MD9R Manuel d'utilisateur Page 59