Jvc 4ch Network Encoder VN-E4 Manuel d'utilisateur télécharger pdf (Page 14)

3. Acquiring Alarm from VN-E4 _ 3.1 Procedure

1) The client establishes a TCP connection to port number 32040.

2) When motion is detected from the video image of VN-E4, or when there are changes to the alarm input (make or break), VN-E4 will send

out alarm information in the following format. The first 4 lines indicate the current alarm input status (make or break). The following 4

lines indicate whether motion has been detected at each of the video input channel.

peripheral.input_pin.pin(1).status=break<CRLF>

peripheral.input_pin.pin(2).status=break<CRLF>

peripheral.input_pin.pin(3).status=make<CRLF>

peripheral.input_pin.pin(4).status=break<CRLF>

video.input(1).detection(motion).status=on<CRLF>

video.input(2).detection(motion).status=off<CRLF>

video.input(3).detection(motion).status=off<CRLF>

video.input(4).detection(motion).status=off<CRLF><CRLF>

3) The client can disconnect TCP32040 to end the alarm acquisition.

3.1 Procedure

3. Ac

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Pas de commentaire

Jvc 4ch Network Encoder VN-E4 Manuel d'utilisateur Page 14