JVC XV-BP1 Manuel d'utilisateur télécharger pdf (Page 20)

[LANGUAGE] Menu

Display Menu

Select a language for the [Setup] menu and on-

screen display.

Disc Menu / Disc Audio / Disc Subtitle

Select the language you prefer for the audio track

(disc audio), subtitles, and the disc menu.

[Original] – Refers to the original language in

which the disc was recorded.

[Other] – Press ENTER to select another lan-

guage. Use number buttons then ENTER to

enter the corresponding 4-digit number accord-

ing to the language code list on page 33.

[Off] (for Disc Subtitle) – Turn off Subtitle.

Note:

Depending upon the disc, your language setting

may not work for some discs.

[AUDIO] Menu

Each disc has a variety of audio output options. Set

the player’s Audio options according to the type of

audio system you use.

Note:

Since many factors affect the type of audio output,

see “The unit’s Audio Output Specifications” on page

36 for details.

HDMI / SPDIF (Digital Audio Output)

Select the output sound format when a device

equipped with an HDMI or Digital Audio input jack is

connected to the HDMI OUT or DIGITAL AUDIO

OUT jack on this player.

[PCM Stereo] – Select if you connect this unit’s

HDMI OUT or DIGITAL AUDIO OUT jack to a

device with two-channel digital stereo decoder.

[PCM Multi-Ch] (HDMI only) – Select if you

connect this unit’s HDMI OUT jack to a device

with multi-channel digital decoder.

[DTS Re-Encode] – Select if you connect this

unit’s HDMI OUT or DIGITAL AUDIO OUT jack to

a device with DTS decoder.

[Primary Pass-Thru] – Select if you connect this

unit’s DIGITAL AUDIO OUT and HDMI OUT jack

to a device with LPCM, Dolby Digital, Dolby

Digital Plus, Dolby TrueHD, DTS and DTS-HD

decoder.

Notes:

• When [HDMI] option is set to [PCM Multi-CH], the

audio may output as PCM Stereo if the PCM

Multi-Ch information is not detected from HDMI

device with EDID.

• If the connected device is only capable of PCM,

the menu can be changed but it will not affect the

actual output format.

Sampling Freq. (Only for SPDIF audio)

[192KHz] – Select this if your A/V Receiver or

Amplifier is capable of handling 192 KHz signals.

[96KHz] – Select this if your A/V Receiver or

Amplifier is NOT capable of handling 192 KHz

signals. When this choice is made, this unit auto-

matically converts any 192 KHz signals to

96 KHz so your system can decode them.

[48KHz] – Select this if your A/V Receiver or

Amplifier is NOT capable of handling 192 KHz

and 96 KHz signal. When this choice is made,

this unit automatically converts any 192 KHz and

96 KHz signals to 48 KHz so your system can

decode them.

Check the documentation for your A/V Receiver or

Amplifier to verify its capabilities.

DRC (Dynamic Range Control)

When a disc encoded in Dolby Digital or Dolby

Digital Plus is playing back, you may wish to com-

press the dynamic range of the audio output (the dif-

ference between the loudest sounds and the qui-

etest ones). This allows you to listen to a movie at a

lower volume without losing clarity of sound. Set

DRC to [On] for this effect.

BD310-JN_BUSAJJK_OM_ENG 2/27/09 4:58 PM Page 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

JVC XV-BP1 Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray JVC XV-BP1