JVC XV-BP1 Manuel d'utilisateur télécharger pdf (Page 34)

34

Symptom

No power.

The power is on, but

the player does not

work.

No picture.

No sound.

The player does not

start playback.

BD-Live feature does

not work.

The Remote Control

does not work properly.

The system does not

function at all.

Possible Cause

• The power cord is disconnected.

• No disc is inserted.

• The TV is not set to receive video

signal output.

• The video cable is not connected

securely.

• The selected resolution is not capa-

ble with your TV.

• The equipment connected with the

audio cable is not set to receive disc

signal output.

• The power of the equipment connect-

ed with the audio cable is turned off.

• The [AUDIO] options are set to the

wrong position.

• The player is in reverse play, fast for-

ward, slow motion or pause mode.

• The disc is upside down.

• An unplayable disc is inserted.

• The rating level is set.

• The disc was recorded on another

unit and was not finalized.

•AUSB Flash Drive is not connected.

• The connected USB Flash Drive

does not have enough space.

• Internet connection is not established.

•Your broadband speed is not fast

enough to use the BD-Live features.

• The [BD-LIVE connection] option in

the [Setup] menu is set to

[Prohibited].

• The Remote Control is not pointed at

the remote sensor on the player.

• The Remote Control is too far from

the player.

•Astate is unstable.

Correction

• Plug the power cord into the wall out-

let securely.

• Insert a disc. (Check the disc indica-

tor in the display window is lit.)

• Select the appropriate video input

mode on the TV.

• Connect the video cable securely.

• Select another resolution using

RESOLUTION button.

• Select the correct input mode of the

audio receiver so you can listen to

the sound from the player.

•Turn on the equipment connected

with the audio cable.

• Set the [AUDIO] options to the cor-

rect position (see page 20).

• Return to the normal playback.

• Insert the disc with the playback side

down.

• Insert a playable disc. (Check the

disc type and regional code.)

• Change the rating level.

• Finalize the disc on that unit.

• Connect a FAT16 or FAT32 formatted

USB Flash Drive to the USB port

(see page 10).

• Secure at least 1GB free space in

the USB Flash Drive for using

BD-Live features

•

Ensure that the unit is correctly con-

nected to the local area network and

can access the internet (see ) 16).

• Contact your Internet Service

Provider (ISP) and increase the

broadband speed is recommended.

• Set the [BD-LIVE connection] option

to [Permitted].

• Point the Remote Control at the

remote sensor of the player.

• Operate the Remote Control closer to

the player.

• Unplug the power cord and then plug

the power cord again after more than

five seconds.

Troubleshooting

BD310-JN_BUSAJJK_OM_ENG 2/27/09 4:58 PM Page 34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Commentaires sur ces manuels

Pas de commentaire