Jvc KW-AVX720 Manuel d'utilisateur Page 61

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 257
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 60
61REFERENCES
ENGLISH
Continued on the next page
Symptom Remedy/Cause
USB
Noise is generated. The track played back is not a playable file format. Skip to another
file.
Tracks cannot play back as you
have intended them to play.
Playback order may differ from the one played back using other
players.
“Now Reading...” keeps flashing
on the screen.
Readout time varies depending on the USB device.
Do not use too many hierarchy and folders.
Turn off the power then on again.
“Cannot play this device Check the
device” appears on the screen.
No tracks are stored. Copy tracks to the USB device.
Correct characters are not
displayed (e.g. album name).
For available characters,
56.
While playing a track, sound is
sometimes interrupted.
The tracks are not properly copied into the USB device. Copy tracks
again, and try again.
Bluetooth
Bluetooth device does not detect
the unit.
This unit can be connected with one Bluetooth cellular phone and
one Bluetooth audio player at a time.
While connected to a device, this unit cannot be detected from
another device. Disconnect currently connected device and search
again.
The unit does not detect the
Bluetooth device.
Check the Bluetooth setting of the device.
Search from the Bluetooth device.
The unit does not make pairing
with the Bluetooth device.
Enter the same PIN code for both the unit and target device. If
the PIN code of the device is not indicated on its instructions, try
“0000” or “1234.”
Select the device name from <Special Device>, then try to
connect again. (
29)
Echo or noise occurs. Adjust the microphone unit (supplied with Bluetooth Adapter)
position.
Phone sound quality is poor. Reduce the distance between the unit and the Bluetooth cellular
phone.
Move the car to place where you can get a better signal reception.
The sound is interrupted or
skipped while using a Bluetooth
audio player.
Reduce the distance between the unit and the Bluetooth audio
player.
Disconnect the device connected for “
Bluetooth PHONE
.”
Turn off, then turn on the unit.
(When the sound is not yet restored,) connect the player again.
“NEW DEVICE” cannot be selected
for “
Bluetooth AUDIO
.”
Bluetooth audio player is already connected. To select “NEW
DEVICE,” disconnect it. ( 29)
The connected audio player
cannot be controlled.
Check whether the connected audio player supports AVRCP (Audio
Video Remote Control Profile).
EN58-65_KW-AVX720_001A_1.indd 61EN58-65_KW-AVX720_001A_1.indd 61 12/19/08 3:47:36 PM12/19/08 3:47:36 PM
Vue de la page 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 256 257

Commentaires sur ces manuels

Pas de commentaire