Jvc DD-8 Manuel d'utilisateur télécharger pdf (Page 45)

Playing back sources from other devices

1 Press [LINE].

• Each time you press [LINE], the display

changes in the display window as follows.

- “LINE 1” for selecting the device con-

nected to the [LINE IN 1] terminal

- “LINE 2” for selecting the device con-

nected to the [LINE IN 2] terminals

- “LINE-DIGITAL” for selecting the digital

audio device connected to the [LINE-DIGI-

TAL IN] terminal

• You can also select the connected device as

the source by repeatedly pressing

[SOURCE] on the main unit.

2 Start playback on the connected

device.

• Refer also to the operation manual for the

connected device.

3 Adjust the volume and make other

necessary settings.

• Refer to “Basic operations” on page 17.

You can select the gain of the signal from the

[LINE IN 1] and [LINE IN 2] terminals.

Use the initial settings for normal operation. If the

sound is too small or too loud, change the settings.

1 Press [LINE] repeatedly to select

“LINE 1” or “LINE 2” in the display

window.

2 Hold down [ENTER].

• Each time you hold down [ENTER], the dis-

play changes as follows.

“LEVEL 1” : the initial setting for “LINE 2”

“LEVEL 2”

“LEVEL 3” : the initial setting for “LINE 1”

• The signal gain increases in the order of

“LEVEL 1”, “LEVEL 2” and “LEVEL 3”.

NOTE

• You can select the signal gain respectively for

“LINE 1” and “LINE 2”.

Selecting other devices as the

source

Selecting the signal gain

Playing back sources from other devices

DD-831[A_Ux].book Page 42 Wednesday, August 30, 2006 11:48 AM

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Jvc DD-8 Manuel d'utilisateur Page 45

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Jvc DD-8