JVC DR-MV150B Manuel du propriétaire télécharger pdf (Page 26)

DV Record Audio

You need to set this if you have a camcorder using

32kHz/12-bit sound connected to the front panel DV

IN jack. Some digital camcorders have two stereo

tracks for audio. One is recorded at the time of shoot-

ing; the other is for overdubbing after shooting.

On the Audio 1 setting, the sound that was recorded

while shooting is used. On the Audio 2 setting, the

overdubbed sound is used.

Auto Chapter

During recording, chapter markers are added auto-

matically at fixed intervals. You can set this interval to

5 minutes or 10 minutes. To turn off automatic chap-

ter marking, select [None].

Disc Settings

To access to the General Setting.

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

3. Use v / V to select

(

Disc)

option and press B.

Initialize

If you load a completely blank disc, the recorder will

initialize the disc.

• DVD-R: The recorder initialize the disc to Video mode.

The recording mode will always be Video mode.

• DVD-RW/ DVD+RW/DVD+R/DVD-RAM: The Initialize

menu will appears. Select [OK] then press ENTER.

DVD-RW disc is initialized to Video mode.

Also, you can reformat the DVD-RW/DVD+RW from

the Setup menu as below.

1. Select the [Initialize] option then press B.

[Start] icon is highlighted.

2. Press ENTER.

• In case of DVD-RW, use b / B to select a

desired Disc Initialize Mode (VR Mode or Video

Mode) then press ENTER.

• In case of DVD+RW/DVD-RAM, use b / B to

select [OK], and press ENTER.

It takes a few moments to format the disc.

Caution:

If you want to change the disc format, everything

recorded on the disc will be erased.

Finalize

Finalizing ‘fixes’ the recordings in place so that the

disc can be played on a regular DVD player or com-

puter equipped with a suitable DVD-ROM drive.

Finalizing a Video mode disc creates a menu screen

for navigating the disc. The menu screen of the final-

ized disc can be accessed by pressing DISC

MENU/LIST or TITLE.

Caution:

Once you have finalized a DVD-R and DVD+R disc,

you cannot edit or record anything else on that disc

except DVD+RW. However, you can record and edit

a DVD-RW disc by choosing [Unfinalize] option.

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

3. Use v / V to select

(

Disc)

option and press B.

4. Select the [Finalize] option on the setup menu

then press B.

5. Press ENTER while [Finalize] is selected.

Finalize menu appears.

6. Select [OK] then press ENTER.

The Recorder starts finalizing the disc.

Notes:

• Finalization can take up to 3-4 minutes or more depend-

ing on the type of disc, how much is recorded on the

disc, and the number of titles on the disc.

Tips:

• If you load a DVD-RW that has already been finalized,

you can ‘Unfinalize’ it by choosing [Unfinalize] from the

Finalize menu. After doing this, you can edit and re-

record onto the disc.

•You cannot unfinalize a DVD-R and DVD+R disc.

• If [Disc Protect] option is set to [ON], the finalize is not

available. To finalize, set [Disc Protect] option to [OFF].

Disc Label

Use the Disc Label feature to enter a name for the

disc. This name appears when you load the disc and

when you display disc information on-screen.

•The Disc label can be up to 32 characters long.

• For discs formatted on a different Recorder, you

will see only a limited character set.

1. Select the [Disc Label] option then press B.

[Edit] icon is highlighted.

2. Press ENTER.

Keyboard menu appears.

To enter characters, see page 44.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

JVC DR-MV150B Manuel du propriétaire Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD JVC DR-MV150B