JVC DR-MV150B Manuel du propriétaire télécharger pdf (Page 38)

Basic Recording from a TV

Follow the instructions below to record a TV program.

Recording starts immediately and continues until the

disc or tape is full or you stop the recording.

1. Switch on the Recorder, select the device (VCR

or DVD) for recording and load a recordable disc

or tape. Also make sure that the TV input is set to

this recorder.

2. Set a recording mode as necessary by pressing

REC MODE repeatedly.

DVD: XP, SP, LP, EP

VCR:

SP, SLP

3. Select the TV channel to record.

4. Use AUDIO to select the audio channel for analog

channel or audio language for digital channel to

record.

The table below shows what will be recorded on

the different settings for different types of analog

broadcast. The last column (Monitor Audio) shows

what you’ll hear as it is recording.

If you set the audio channel to SAP, but there is

no SAP channel being broadcast, the main audio

(mono or stereo) will be recorded.

5. Press z REC once to start recording.

The REC indicator lights in the display window.

6. Press STOP (x) to stop recording.

Notes:

•The maximum numbers of DVD titles are as show

below;

- DVD-R/RW/DVD-RAM: 99

- DVD+R/RW: 49

• If the Recorder is powered off during DVD recording, the

recording will not be saved.

Instant T

imer Recording

Instant Timer Recording allows you to make a

recording easily of a preset length without using the

program timer.

1. Follow steps 1-4 as shown left (Basic Recording

from a TV).

2. Press REC once to begin recording.

3. Press REC two additional times to set the DVD

recorder to 10min recording time or the VHS

recorder to 30min recording time.

DVD: Each subsequent press increases the recording

time by 10 minutes.

VCR: Each subsequent press increases the recording

time by 30 minutes (maximum 540 minutes).

Please confirm the VHS tape has enough

remaining time to be recorded before

recording.

Checking the Recording Time

Press z REC or DISPLAY once to check the record-

ing time. The recalled setting will automatically return

to the TV screen for a moment.

Also, remaining time of recording is shown in the dis-

play window.

To Extend the Recording Time

The recording time can be extended anytime by

pressing z REC.

Each subsequent press increases the recording time

by 10 minutes (DVD) or 30 minutes (VCR).

To Pause the Recording

1. Press PAUSE/STEP (X) to pause the recording.

2. When you want to continue recording, press

PAUSE/STEP (X) or z REC.

Notes:

• If you press PAUSE/STEP (X) during the Instant Timer

Recording, it will be canceled.

• The Recorder will automatically power off when the

Instant Timer Recording ends.

• If the unit is DVD mode when the VCR Instant timer

recording ends, the unit will not automatically power off.

TV Broadcast Selected Broadcast Audio Monitor

Audio

LChR Ch Audio

MONO MONO MONO MONO MONO

STEREO STEREO L R STEREO

Left L L Left

Right R R Right

MONO MONO MONO MONO

MONO+SAP MONO MONO MONO MONO

SAP SAP SAP SAP

STEREO STEREO L R STEREO

+SAP SAP SAP SAP SAP

MONO MONO MONO MONO

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

JVC DR-MV150B Manuel du propriétaire Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD JVC DR-MV150B